Perhaps among the most appealing things about making a upholstered headboard is the fact that the job is totally flexible — the maintenance board utilized to make the headboard can be produced out of various substances, and it may be shaped any way you like. Besides the board, the headboard necessitates upholstery foam, batting, workmanship and workmanship, at the very least.

Backing Board: The Strength of the Structure

Beneath all of the cushy foam and upholstery is some type of solid material utilized to assist the headboard keep its shape. If you wish to construct a lightweight headboard that mounts on a wall, the backing board can be something as flimsy as corrugated cardboard or a thick foam-board sheet, then the kind commonly used for insulation. To get a sturdier headboard, use plywood, an old door, either aligned, or even an present wood headboard that’s in less-than-perfect shape. Based on the material used for the backing board, then you might require a saw or utility knife to reduce the headboard to the ideal shape.

Soft, Supple Insides

The distance between the backing board and the outer material lends comfort to the headboard. A thick sheet of upholstery foam makes the headboard nice and cushy — anywhere from 1 to 3 inches thick, depending on what’s available and what you have in mind for your headboard design. The foam, cut to the size of the headboard using a utility knife, which adheres to the backing board using a spray adhesive suitable for foam. A layer of batting, cut to the same size as the outer upholstery material, helps soften the shape between the foam and the fabric.

Functional Fabric

As you could use just about any material for the headboard, an upholstery-grade fabric is the best option, since it will last a lot longer, compared to fabrics intended for making thin tops or skirts, for instance. Opt for a fabric big enough to fully cover the headboard to avoid needing to stitch pieces together. To attach the fabric to the headboard, set the fabric face-down on a clean ground, together with the batting spread out atop the fabric. Center the headboard, with foam attached, above the batting so the foam side rests on the batting. Stretch one side of the fabric across the back of the headboard; then staple it set each 3 to 4 inches. Repeat with the other hand, the two remaining part, finally tucking and stapling corners as if developing a gift-wrapped package. Trim excess fabric and batting using scissors.

Extra Details

When the headboard is made, it takes a way to attach to the wall or to the bed. Add posts or boards on either side to attach it to your bed frame with nuts and bolts, or use sturdy interlocking mounting brackets designed to hold heavy objects to the wall if you’re hanging a heavy headboard directly on the wall. Attach the headboard to wall studs or heavy duty wall liners when the headboard is hefty. To add tufts to the headboard, drill narrow holes throughout the backing board subsequently stitch upholstered buttons through from back to front, using a standard holed button on the bottom to hold the upholstered buttons tightly in position.

See related