In order to take showers in the beginning or end of the day a shower-head shines out of your bathroom wall having a size of pipe. The fixture is also low for hassle-free use or could be too near the wall. By including an extension, it’s possible for you to adjust its reach. It might require more frequent replacement in relation to the showerhead whether this addition consists of a material like plastic.

Allow the fixture to dry following the prior shower, that might have several hours. You don’t want pipe and the shower head to be slippery from water.

By turning it counter-clockwise remove the shower head. Use a wrench to change the fixture in the event the fixture is wedged in place. In the event the fixture is slippery, place a towel around it to improve the wrench’s grip.

By turning it counter-clockwise remove the extension. You might need to use towel and a wrench when it is corroded. By turning it counter-clockwise remove the shower head in the extension. You might need to use towel and a wrench.

Clean the threads on the extension, if required. Apply Teflon tape on both ends of the extension that is new. Wind it on two or 3 times in a counter-clockwise path when you change the pipe therefore it will not come off.

Insert one end of the extension according to exactly what the extension packaging describes. Till it suits firmly turn the extension clockwise. Don’t over-tighten. Generally, you want the finish that attaches to the shower head to point-down.

Attach the shower head to the conclusion of the extension arm till it suits firmly and change it it clock-wise. Use the wrench however don’t over-tighten if required.

Turn on the shower to check the extension. The water should flow with no drips or leaks through the pipe.

See related